|
StellarNet Light SL1
- 10,000 hour tungsten krypton bulb with 2800 degree Kelvin color temperature
for process control and field portable applications from 350-1600nm. 7-28
VDC input with 0.2% power regulation for bulb. 12VDC @ 800ma wall power
adapter included. 5 minute stabilization, no fans, slot for filters. Order
option SL1-BLUE with bright blue 470nm LED for fiber optic sensor applications. |
|
StellarNet Light SL1-FILTER
option has all the basic SL1 features listed above with the addition of
an extended nose housing that allows 1/2 inch diameter filters to be installed.
This option includes an equilization filter that flattens the response from
500-900nm allowing a larger reference at 400nm for color based applications.
Filters installed in the nose cone and are somewhat insulated from the bulb
heat. |
|
StellarNet Light SL1-CUV
option has all the basic SL1 features listed above with the addition of
an with integrated 1cm cuvette holder, collimating lens, and +12VDC adapter.
3 different collimator positions allow the cuvette to be used with other
light sources or for 90 degree fluorescence applications. |
|
StellarNet Light SL2
- Calibration lamp with Mercury and Argon gas emission lines from 253.65-1013.98nm.
Portable operation from 9VDC battery and includes 5VDC wall power adapter.
Used to perform wavelength calibration and demonstrate spectrometer resolution
and operational range for UV/VIS/NIR/XNIR configurations. |
|
StellarNet Light SL3
- Worlds smallest 4000 hour deuterium light source for continuous wave UV.
Specially designed for maximum stability this unit is suitable for process
applications down to 200nm. It has an integrated temperature control and
measures only 3.5 x 2.75 x 6.5 inches! Integrated filter holder fits several
0.5" diameter disk filters for various applications. Includes 24 VDC
power adapter. |
|
StellarNet Light SL4
- is a miniature pulsed Xenon light source that covers the 200-1150nm. Its
small size of 1.5 x 2.5 x 6 inch provides the ultimate in portability. It
has a 2 Watt optical power output or 8.5 milli-joules per flash. A TTL trigger
input cable plugs directly into the EPP2000 spectrometers. Integrated filter
holder fits several 0.5" diameter disk filters for various applications
with +12VDC operation..
|
|
StellarNet Light SL5
- is a miniature Deuterium + halogen light source that covers the 190-900nm
range. Its small size of 1.5 x 2.5 x 6" makes it a perfect match for
our EPP2000C UV-VIS spectrometer (as pictured). The SL5-DH lamp connects
via fiber optic cable to cuvette holders, dip probes, and flow cells, with
the return signal routed to the spectrometer SMA 905 input connector. The
deuterium and halogen lamps can be individually turned on/off and have a
front and rear panel shutter control. |
|
StellarNet IC2 Integrating
Cube- has two SMA fiber optic connectors (output to spectrometer and input
from light source). It functions as an integrating sphere or a cosine receptor.
It measures 2 x2 x2 inches with a 5/8 inch diameter view port. The Halon
interor surface provides optical measurements in the VIS-NIR ranges. The
IC2 does not require power and an optional tripod mount provides for convienient
setups.. |