A. Features:
1. Mass type suitable for mass processing
If it is a micro tube in 1.5ml microtube, it is large capacity that 96 enters.
It corresponds to and the test tube.
2. Various containers can be used by rotor (optional) exchange
96A, 96B, 96C, and 96D for old product VC-96N can be used for the rotor.
Besides this, it prepared it for for Maicrobaial and Dispo Tooshizcda etc.
3. The operation improvement and the timer function are enhanced by digital, too.
It is possible to set by digital at time. Because the time often spent setting comes by
the memory, it is convenient also for the routine work.
4. Two mode of operations can be installed, and Leak change the manual operation and the
automatic operation.
The heater rotor pump stops in a centrifugal, concentrated mode after set time passes
(The pump is connected with the back outlet). The vacuum release can be changed with
the automatic operation or the manual operation or the valve.
The heater is heated in the freeze-drying mode only at the set time.
Because the pump keeps moving after time passes, it is possible to use it as a
freeze-drying chamber (When freeze-drying it, it is necessary to combine the oil-sealed
rotary vacuum pumps).
5. The chamber is a water jacket type.
If the cooling water circulation device is connected, the centrifugal
concentration below the room temperature becomes possible, too.
B. Component:
1. Centrifugal Concentrator 1SET
2. Freeze Trap 1SET
3. Diagram Pump 1SET
C. Specification
a) Centrifugal Concentrator 1SET
1. Temperature range : +4¡É¢¦+70¡É
2. Method for rotor : magnetic drive method
3. Drive speed : 300~2,000 rpm/min
4. Safety Device 1 : circuit breaker, rotation, and pump energizing and high temperature
circuit breakers
5. Safety Device 2 : Various, abnormal displays(not volatile memory, temperature sensor,
heater output, high/low temperature, motor, and rotational speed limit)
6. Vacuum meter :0-0.1 MPa bourdon tube
7. Timer.. : 1 minute ~ 99 hours and 59 minutes. (Digital)
8. Lid/chamber material: lid- PVC
Chamber- Teflon Coat stainless steel SUS304
9. Vacuum release : timer synchronization auto and manual operation
10. Inlet filter for Leak : 0.2¥ìm
11. Vacuum Pump : Separately necessary
12. Control for vacuum pump : Attached for switch, concent
13. Suction nozzel diameter : ©ª14
14. External dimension : 360¡¿410¡¿451Hmm
15. Weight : approx. 36 §¸
16. Current : AC 100V, 1.5A
b) Freeze Trap 1set
1. Temperature range : -75¡É
2. Freeze Coil inner dimension: 90mm
3. Freezer : 150W¡¡¡¿¡¡2
4. Tank Inner Dimension: ©ª135mm¡¿210Hmm (about 3§¤)
5. Body External Dimension: 330 ¡¿ 470 ¡¿ 835Hmm
6. Weight ¡¡¡¡¡¡¡¡¡¡¡¡¡¡:¡¡about 70kg
7. Power : AC100V, 10A
¡¡
c) Diaphragm Pump 1Set
1. Number of stage : 3
2. Max. pumping speed 50/60Hz (m3/h//cfm) : 1.3/1.5//0.88
3. Ultimate vacuum(mbar//Torr) : 2//1.5
4. Max. pressure outlet : 1.1 bar
5. Motor power : 0.08kw
6. Motor rpm. 50/60Hz : 1500/1800
7. Dimensions : 315¡¿143¡¿220Hmm
8. Mass : 6.9 Kg
C. Accessories
1. Rotor, 96¡¿1.5ml 1EA
2. Rotor, 48pcs, 16.5~18©ª¡¿120mm 1EA
D. Remarks ;
1. The installation and the operation will be performed by the contractor
responsibility at the end-user's site.
2. One year warranty after installation.
|