A. Features ;
1. Reasonable model by whom capacity is held concurrently with space-saving
It corresponds to Tooshizcda and the test tube besides 40 enters if it is a
micro tube in 1.5ml microtube. The space required for installation of this
product unit is A3 form level.
2. 36A and 36B and 36 C for old product VC-36S/36N can be used for the rotor
for which various containers can be used by rotor (optional) exchange.
Besides this, it prepared for Maicrobaial.
3. The operation improvement and the timer function are enhanced by digital,
too.
It is possible to set by digital at time. Because the time often spent setting
comes by the memory, it is convenient also for the routine work.
4. Two mode of operations can be installed, and Leake change the manual
operation and the automatic operation.
The heater rotor pump stops in a centrifugal, concentrated mode after set
time passes (The pump is connected with the back outlet). The vacuum
release can be changed with the automatic operation or the manual operation
or the valve.
The heater is heated in the freeze-drying mode only at the set time.
Because the pump keeps moving after time passes, it is possible to use it as a
freeze-drying chamber (When freeze-drying it, it is necessary to combine the
oil-sealed rotary vacuum pumps).
5. The chamber is a water jacket type.
If the cooling water circulation device is connected, the centrifugal
concentration below the room temperature becomes possible, too.
B. Components
1. Spin Dryer 1set
2. Freeze Trap 1set
3. Vacuum Pump 1set
C. Specifications ;
a) Spin Dryer 1set
1. Temperature range : +4¡É¢¦+70¡É
2. Method for rotor : magnetic drive method
3. Drive speed : 300~2,000 rpm/min
4. Safety Device 1 : circuit breaker, rotation, and pump energizing and high temperature
circuit breakers
5. Safety Device 2 : Various, abnormal displays(not volatile memory, temperature sensor,
heater output, high/low temperature, motor, and rotational speed limit)
6. Vacuum meter :0-0.1 MPa bourdon tube
7. Timer.. : 1 minute ~ 99 hours and 59 minutes. (Digital)
8. Lid/chamber material : lid- PVC
Chamber- Teflon ..stainless steel SUS304
9. Vacuum release : timer synchronization auto and manual operation
10. Inlet filter for Leak : 0.2¥ìm
11. Vacuum Pump : Separately necessary
12. Control for vacuum pump : Attached for switch, concent
13. Suction nozzel diameter : ©ª14
14. External dimension : 310¡¿360¡¿343Hmm
15. Weight : approx. 24 §¸
16. Current : AC 100V, 2A
b) Freeze Trap (VA-500R) 1set
1. Temperature range : -75¡É
2. Freeze Coil inner dimension: 90mm
3. Freezer : 150W¡¡¡¿¡¡2
4. Tank Inner Dimension: 135mm¡¿210Hmm (about 3§¤)
5. Body External Dimension: 330 ¡¿ 470 ¡¿ 835Hmm
6. Weight ¡¡¡¡¡¡¡¡¡¡¡¡¡¡:¡¡about 70kg
7. Power : AC100V, 10A
¡¡
C. Remarks ;
1. The installation and the operation will be performed by the contractor
responsibility at the end-user's site.
2. One year warranty after installation.
|